The ground-breaking Harley-Davidson CANbus controller provides plug& play connection and intelligent control of aftermarket and genuineHarley-Davidson accessories right from your bikes original switches orDENALI Accessory Manager Software. Simply connect the CANsmartController to your Harley-Davidson diagnostic port to access over 35programmable accessory settings that provide intelligent control ofauxiliary lights, horns, brake lights, or any other accessory you canimagine. The four accessory circuits are electronically fused and canprovide up to 25 peak amps (10 amps continuous).

Gen II -More Features, More Power, More Versatile

Unlike the Gen ICANsmart, all four circuits of the Gen II can provide a full 10 amps ofcontinuous power and each circuit can be configured to run any accessorytype. The maximum power draw for the whole unit remains at 30 ampscontinuous. The Gen II also features two new auxiliary light settings. Youcan now modulate your auxiliary lights for added conspicuity, and set yourleft and right side lights to independently cancel when you activate yourcorresponding turnsignal

Features:

• High/LowSync– Set auxiliary lights to switch between a programmablehigh/low setting with the factory high beam switch.
• ON/OFFand Dim– Independently control two sets of lights ON/OFF andchange intensity level (for both day and night) right from your originalvehicle switches.
• Modulate Lights– Set auxiliarylights to modulate to increase your visibility to othermotorists.
• Flash to Pass– Need to get someone’sattention? Pulse your high beam switch three times and your auxiliarylights will strobe three times fast.
• Cancel With TurnSignal– This feature cancels the corresponding auxiliary lightwhen you turn your turn signal on preventing powerful auxiliary lights fromoverpowering your signal.
• Inverse Flashing WithHazards– This features flashes your auxiliary lights inversely toyour hazard lights, increasing visibility during roadsideemergencies.
• Plug & Play Horn Installation-Quickly and easily connect high-power aftermarket horns like ourSoundBomb without having to add an additional harness orrelay.
• Strobe with Horn– With this featureselected the CANsmart software will automatically strobe yourauxiliary lights when you sound your horn. This feature works whether youhave the factory horn or SoundBomb horninstalled.
• Deceleration Activated “Smart Brake”Technology– The CANsmart reads vehicle speed in real-timeto activate your auxiliary brake light during deceleration before you eventouch the brake. You can adjust the sensitivity and minimum speed at whichthe Smart Brake Feature will activate.
• Flash PatternBraking– The CANsmart provides four different flashpatterns that make our super bright auxiliary brake lights even noticeableto motorists behind you. You can set auxiliary brake lights to only flashunder hard braking, flash continuously as your brake is applied, or flashfour times rapidly then hold steady (California legal flashrate).
• Circuit Function Selector-The CircuitFunction Selector in the CANsmart software will let you run any accessoryof your choice on any of the four circuits. Click on a circuit icon to openthe drop-down menu and make your selection from the list of availablecircuit functions.
• Switched Power Source– TheCANsmart provides a universal “accessory” option that simply givesyou clean switched 12V power. That means whatever accessory you connect tothis circuit will turn on and off with your ignition.
• DelayTime Out– You can also set the accessories on this circuit to havea delayed time out. This will keep them powered for up to 30 seconds afteryour turn off your bike.
• On Board Power– The”accessory” circuit option is ideal for powering your GPS, phone, heatedgear or any other electronic device.

Whats InThe Box?

• CANsmart Controller
• (x2) 5.5ftLight Extension Cables
• 5ft SoundBomb Horn ExtensionCable
• B6 Brake Light WiringAdapter
• Zip-ties
• Adhesive Hook-and-LoopFastener
• Micro USB Programming Cable